Banner Type
Wind-permeable mesh banners for fence-mounted, construction-site, and high-wind outdoor installs — 70/30 weave for clean print, 50/50 for hurricane-prone exposure.
What you get
A solid vinyl banner on a chain-link fence is a sail. The first 25 mph gust either rips the banner, rips the fence, or both. Mesh banners solve this by letting wind pass through the print — 30% open area on 70/30 weave, 50% on 50/50 weave. The print still reads sharp from the typical viewing distance (15+ feet), but the wind load drops by 40–70%. Anywhere you'd put a banner on a fence, construction site, or balcony, you want mesh.
70/30 is the standard mesh weave: 30% open area, 70% printed surface. The print is nearly as sharp as solid vinyl from 15+ feet, and it handles wind up to ~50 mph. 50/50 has 50% open area — the print is visibly more porous up close, but the banner is essentially immune to wind. Use 70/30 for branding banners that need to read sharply. Use 50/50 for fence-line construction wraps, multi-story exterior installs, and anywhere a failure would cost you a banner replacement plus a liability claim.
Construction-site banners are one of the highest-volume mesh applications in Las Vegas. Project signage, sponsor walls around new builds, jobsite branding for general contractors — all mesh. We reinforce grommets every 18 inches (vs 24 on standard vinyl) and recommend bungee mounting over zip-ties so the banner can flex without tearing. Standard sizes: 6×4 ft (job sign), 10×4 ft (sponsor strip), 20×6 ft (full fence-section wrap).
Mesh is the easiest banner type to install on a fence: zip-tie or bungee through grommets every 18–24 inches. Two people can mount a 20×6 ft mesh banner on chain-link in under 20 minutes. We handle Vegas-area installs including jobsite coordination for general contractors. Removal is identical to install — no adhesive residue, no fence damage.
Frequently asked
